Sony Multi Interface Shoe Adapter - Manual (Page 519)

519
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To set the center position of original image
1
Press [Position], turning it on.
2
Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Kaleidoscope settings
You can set the number of blocks, the partition reference point and angle,
horizontal and vertical offsets, a reflection position, and other parameters.
To apply the Kaleidoscope effect
With the Kaleidoscope menu displayed, set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
2 Offset H Amount of horizontal offset of
image with mirrors fixed
–4.000 to +4.000
a)
–16.000 to +16.000
b)
3 Interval V Vertical distance between mirrors
(original width)
0.000 to 10.000
a)
0.000 to 40.000
b)
4 Offset V Amount of vertical offset of image
with mirrors fixed
–4.000 to +4.000
a)
–16.000 to +16.000
b)
5 Angle Mirror angle –8.000 to +8.000
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 H Horizontal original image center
position
–4.000 to +4.000
a)
–16.000 to +16.000
b)
2 V Vertical original image center
position
–4.000 to +4.000
a)
–16.000 to +16.000
b)
Knob Parameter Adjustment Setting values
1 Number Number of blocks 0.00 to 100.00
2 Phase Angle of partition reference point
–8.000 to +8.000
a)
3 Offset H Amount of horizontal offset
–4.000 to +4.000
a)
–16.000 to +16.000
b)
4 Offset V Amount of vertical offset
–3.000 to +3.000
a)
–12.000 to +12.000
b)