Sony Multi Interface Shoe Adapter User Manual
Page 74
74
Names and Functions of Parts of the Control Panel
Ch
apt
button, and the device selected with the
device selection button is cued up to the
start point of the material. When more
than one device is selected, the amber
flashing continues until the reference
device is cued up, and when the cueing
up is finished, this button lights green.
REW:
When pressed, this button lights
amber, and material of the device
selected with the device selection
buttons is rewound. To stop during the
rewind, press the [STOP] button or
[ALL STOP] button.
PLAY:
When pressed, this button lights
amber, and the device selected with the
device selection buttons plays. The
playback stops not only if the [STOP]
button is pressed, but also if any of the
[STB OFF], [SHTL], [JOG], [CUE],
[REW], [PLAY], [FF], and [ALL
STOP] buttons is pressed. When the
[VAR] button is pressed while the
device is playing back, the device plays
at one times normal speed in variable
mode.
FF:
When pressed, this button lights amber,
and the material of the device selected
with the device selection buttons is fast
forwarded. To stop during the fast
forward, press the [STOP] button or
[ALL STOP] button.
ALL STOP:
When pressed, all device
material playback and other operations
stop. During cueing up of any of the
devices, this button flashes amber, and
when all cueing up operations are
completed, it lights green.
REC:
When pressed simultaneously with
the [PLAY] button, this button lights
red (the [PLAY] button lights amber),
and the image from the selected device
is recorded.
This button cannot be used for frame
memory clip operations.
f
External device operation buttons
ENBL (enable):
When this is pressed,
turning it on, the search dial [VAR],
[JOG], and [SHTL] button operations
are enabled.
VAR (variable):
Sets the search dial to
variable mode.
JOG:
Sets the search dial to jog mode.
SHTL (shuttle):
Sets the search dial to
shuttle mode.
g
TIMELINE button
Press to switch the device selected with the
device selection buttons to timeline setting
mode.
h
STOP button
When pressed, this lights amber, and
operation of the device selected with the
device selection buttons stops.
i
Search dial
Use this for search and other operations on
the material of an external device.
For details of the method of use, see
“Controlling Tape/Disk Transport” in
Chapter 12 (Volume 2).