Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 127)

VIVOTEK
User's Manual - 127
Network : This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List in the CIDR format, e.g. 192.168.xx.xx/24.
For example:
Range : This rule allows the user to assign a range of IP addresses to the Allow/Deny List.
Note: This rule is only applicable to IPv4 addresses.
For example:
IP address 192.168.2.x will be blocked.
Administrator IP address
Always allow the IP address to access this device : You can check this item and add the Administrator’s
IP address in this field to make sure the Administrator can always connect to the device.
If IPv6 filter is preferred, you will be prompted by the following window. Enter the IPv6 address and the
two-digit prefix length to specify the range of IP addresses in your configuration.
Range : This rule allows the user to assign a range of IP addresses to the Allow/Deny List.
Note: This rule only applies to IPv4 addresses.
For example: