Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 24)

VIVOTEK
24 - User's Manual
In-ceiling Mount - Mount Option C
C-1. The in-ceiling mount bracket is separately purchased. Apply the alignment sticker to a
preferred location. Drill a hole that is 200mm in diameter. The maximum board thickness is
63mm. Make sure the ceiling board can stand the weight of the camera (1.2kgs).
C-2. Secure the included clamping arms to the sides of the camera. When doing this, use the
included foam block to help avoid scratch and damage.
Ø200mm
63mm
Up to
Ceiling Hole Template Sticker
260mm
x3