Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 405)

VIVOTEK
User's Manual - 405
© 2022 VIVOTEK INC. All Right Reserved
254
NAME VALUE SECURITY
(get/set) DESCRIPTION
revisedcenteraxis <coordinate> 1/7 The actual center axis coordinate
radius 0, <positive
integer> 1/7 The actual center radius
7.47 Fisheye Local Dewarp Setting
Group: fisheyedewarp_c<0~(n-1)> (capability_fisheyelocaldewarp_c<0~(n-1)> > 0)
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
NAME VALUE SECURITY
(get/set) DESCRIPTION
panspeed -5 ~ 5 1/4 Pan speed of regional view
tiltspeed -5 ~ 5 1/4 Tilt speed of regional view
zoomspeed -5 ~ 5 1/4 Zoom speed of regional
s<0~(m-2)>_panora
ma_panstart 0~359 1/4 Initial pan position of panorama view.
(only available for 1P and 2P mode at
ceiling or floor mount)
s<0~(m-2)>_region_
pan -90~359 1/4 Pan home angle of regional view (for
1R mode)
Pan range of ceiling/floor mount is
[0~359].
Pan range of wall mount is [-90~90].
s<0~(m-2)>_region_t
ilt -90~90 1/4 Tilt home angle of regional view (for
1R mode)
Tilt range of ceiling/floor mount is
[0~90].
Tilt range of wall mount is [-90~90].
s<0~(m-2)>_region_
zoom 100~300 1/4 Zoom home ratio of regional view (for
1R mode)
s<0~(m-2)>_region_r
<0~(i-1)>_pan -90~359 1/4 Pan home angle of regional view (for
4R mode, i is the view index and range
from 0 to 3)
Pan range of ceiling/floor mount is
[0~359].
Pan range of wall mount is [-90~90].
s<0~(m-2)>_region_r
<0~(i-1)>_tilt -90~90 1/4 Tilt home angle of regional view (for
4R mode, i is the view index and range
© 2022 VIVOTEK INC. All Right Reserved
255
NAME VALUE SECURITY
(get/set) DESCRIPTION
from 0 to 3)
Tilt range of ceiling/floor mount is
[0~90].
Tilt range of wall mount is
[-90~90].
s<0~(m-2)>_region_r
<0~(i-1)>_zoom 100~300 1/4 Zoom home ratio of regional view (for
4R mode, i is the view index and range
from 0 to 3)
7.48 PIR Behavior Define
Group: pir (capability_npir > 0)
NAME VALUE SECURITY
(get/set) DESCRIPTION
enable <boolean> 1/1 Enable/disable PIR
7.49 Auto Tracking Setting
Group: autotrack_c<0~(n-1)> (capability_image_c<0~(n-1)>_autotrack_support > 0)
n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
objsize_type -1~2 1/4 Type of object size.
-1 : customized width and height
0 : object size = 30 x 30
1 : object size = 10 x 20
2 : object size = 10 x 10
objsize_customized_w
idth 10~320 1/4 The minimum width of tracking target.
objsize_customized_h
eight 10~240 1/4 The minimum height of tracking target.
sensitivity 0~2 1/4 Tracking sensitivity.
0: Low
1: Medium
2: High