Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 133)

VIVOTEK
User's Manual - 133
To create a recorded patrol,
1. Enter a name for the patrol.
2. Use mouse clicks or the PTZ panel to select a field of view as your start point.
3. Select the Pan/Tilt/Zoom/Focus speed, and the PTZ control mode.
4. You can then click on the Record button and start to scan through your surveillance
area by moving along and staying at the points of your interest. Click the record button
again to stop the recording when you visisted all of your points of interest. Zoom and focus
are also supported.
5. You can use the playback button to review your recorded patrol before you click the
Save button. When you are satisfied with the recording, click Save and Close to leave the
configuration page. Note that if you start a new recording without saving the previous one, the
previous recording will be abandoned.
1
2
3
4
2
5
NOTE:
The Joystick mode simulates joystick control using your mouse. Move your mouse target cursor to the
direction you want and click on the screen, the lens will move to that direction. You can click and hold
down the mouse button to continue scanning.
center point
Lens move
direction
Slow
Fast