Recording > recording settings – Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera User Manual
Page 167
VIVOTEK
User's Manual - 167
Recording > Recording settings
This section explains how to configure the recording settings for the Network Camera.
Recording Settings
► Please remember to format your SD card when using it for the first time. Please refer to page 172 for
Recording Settings
Click
Add
to open the recording setting window. On this page, you can define the adaptive recording,
recording source, recording schedule, and recording capacity. A total of 2 recording settings can be
configured.
■ Recording name: Enter a name for the recording setting.
■ Enable this recording: Select this option to enable video recording.
■ With adaptive recording:
Select this option will activate the frame rate control according to alarm trigger. The frame control
means that when there is alarm trigger, the frame rate will raise up to the value you’ve set on Stream
setting page. Please refer to page 86 for more information.
Insert your SD card and click here to test
NOTE: