Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 49)

VIVOTEK
User's Manual - 49
Joystick Settings
Enable Joystick
Connect to the USB plug of the joystick to a USB port on your management computer. Once a USB
joystick is connected, the related joystick configuration will be available on the Client settings window.
The joystick should work properly without installing any other driver or software.
Then you can begin to configure the joystick settings of connected devices. Please follow the instructions
below to enable joystick settings.
1. Click on the Configure buttons button. If your joystick is working properly, it will be displayed on the
drop-down list.