Allied Telesis AT-S60 - Manual (Page 103)

AT-S60 Management Software User’s Guide
Section I: Basic Features 103
The information in this menu is for viewing purposes only. The
columns in the menu are described below:
Port
Indicates the port number in the following format:
slot number. port number
For more information, see Specifying Ports on page 34.
Media
Indicates the type of port. See the following:
❑ TP (for twisted pair) indicates one of the following:
— An RJ-45 port on an AT-8411 line card.
— An RJ-45 port an AT-8413 line card when the
Negotiation parameter on the Port Configuration Menu is
set to Auto and the port is connected to another RJ-45
port. For more information about the Port Configuration
Menu, see Configuring Port Parameters on page 106.
— An RJ-45 port an AT-8413 line card when the
Negotiation parameter on the Port Configuration Menu is
set to Manual and the Media Selection parameter on the
Port Configuration Menu is set to TP. For more
information about the Port Configuration Menu, see
Configuring Port Parameters on page 106.
❑ Fiber indicates a fiber optic port on an AT-8412 or AT-8414 line
card.
❑ GBIC (for GBIC port) indicates one of the following:
— A GBIC port on an AT-8413 line card when Negotiation
is set to Auto and the port is connected to another GBIC
port.
— A GBIC port on an AT-8413 line card when Negotiation
is set to Manual and the Media Selection is set to GBIC.
❑ Auto indicates a port on an AT-8413 line card with Auto-
negotiation enabled when the port is not connected to another
port.
Status
Indicates the administrative status, enabled or disabled, of the
port.
Enabled -Indicates the port is able to send and receive Ethernet
frames. This is the default setting for all ports on the switch.