Allied Telesis AT-S60 - Manual (Page 697)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 697
Use this parameter to enable the switch to be remotely managed
with an SNMP application program.
Note
If the check box in the Enable SNMP Access box is empty, the switch
cannot be managed through SNMP. This is the default.
4. To enable authentication failure traps to be sent on behalf of the
switch, click the box next to Enable Authentication Failure Trap.
5. Click Apply to update the User Table.
6. To save your changes, return to the General Tab and click Save
Changes.