Allied Telesis AT-S60 - Manual (Page 105)

AT-S60 Management Software User’s Guide
Section I: Basic Features 105
Enabled - Flow control occurs on both frames entering and
leaving the port.
Disabled - No flow control occurs on the port.
STP
The current operating status of the port. Possible values are:
Forwarding - The port is sending and receiving Ethernet frames.
This is the normal state for a switch port.
Disabled - STP operations have been disabled on the port.
Blocking - This is the standby mode. The port does not participate
in frame relay. The forwarding process discards received frames
and does not submit forwarded frames for transmission.
Listening - The port is enabled for receiving frames only. The port
is preparing to participate in frame relay.
Learning - The port is enabled for receiving frames only. The
learning process can add new source address information to the
forwarding database.
Pri
The priority assigned to frames that are received by the port.
Possible values are:
No - Indicates no override priority has been assigned to the port.
Untagged frames are forwarded to the low priority queue. Tagged
frames are forwarded to either the high or low queue, depending
on the priority embedded in the frames.
Low - Indicates low priority has been assigned to the port. As a
result, all tagged and untagged frames are sent to the low priority
queue.
High - Indicates high priority has been assigned to the port. As a
result, all tagged and untagged frames are sent to the high
priority queue.
For more information, see Class of Service Overview on page 215.