Allied Telesis AT-S60 - Manual (Page 431)

AT-S60 Management Software User’s Guide
Section IV: VLANs 431
Deleting a VLAN
To delete a VLAN, perform the following procedure:
1. From the Configure Port Based VLAN menu, type 2 to select Delete
Port Based VLAN.
The following prompt is displayed:
Enter VLAN ID: [2 to 4094] ->
2. Enter the VID of the VLAN you want to delete and press Return.
Note
You cannot delete the Default_VLAN, which has a VID of 1, or a
dynamic GVRP VLAN.
The following confirmation prompt is displayed:
Do you want to delete this VLAN? [Yes/No] ->
3. Type Y to delete the VLAN or N to cancel the procedure. Press Return.
The VLAN is deleted. All untagged ports in the deleted VLAN are
returned to the Default_VLAN as untagged ports.
4. Repeat this procedure to delete additional VLANs.
5. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.