Allied Telesis AT-S60 - Manual (Page 666)

Chapter 38: IGMP Snooping
Section VI: Web Browser Management 666
Displaying a List of Host Nodes and Multicast Routers
You can use the AT-S60 software to display a list of the multicast groups
on a switch, as well as the host nodes. In addition, you can view the
multicast routers. A multicast router receives multicast packets from a
multicast application and transmits the packets to host nodes.
To view host nodes and multicast routers, perform the following
procedure:
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the IGMP Tab.
The IGMP Tab is shown in Figure 226.
Figure 226 Monitoring System Page, IGMP Tab
3. To view the multicast addresses and the host nodes, click View
Multicast Host List and then click View.