Allied Telesis AT-S60 User Manual
Page 638
Chapter 34: MAC Address Table
Section VI: Web Browser Management
638
5. In the Port Number field, enter the port number that is to be assigned
the MAC address. You can specify more than one port.
For information about specifying ports, see Specifying Ports on
page 34.
6. In the VLAN ID field, enter the VLAN ID for the specified port.
The range of VLAN IDs is 1 to 4094, with 1 as the default VLAN ID.
7. Click Apply.
The MAC Addresses Table Page is displayed as shown in Figure
212 on page 634.
8. Repeat this procedure to add other static or multicast addresses to
the switch.
9. Click Close.
The MAC Address Tab is redisplayed. Your changes are
immediately activated on the switch.
10. To save your changes, return to the General Tab and click Save
Changes. Your changes are saved on the switch.