Allied Telesis AT-S60 - Manual (Page 822)

Appendix A: AT-S60 Default Settings
822
Note
For the AT-8412/SC FX and AT-8412/MT FX line cards, the default
setting for Negotiation is Manual. For all the other line cards, the
default setting for Negotiation is Auto.
RS-232 Port
Default Settings
The following table lists the RS-232 port default settings.
SNTP Default
Settings
The following table lists the SNTP default settings.
Operator Password operator (case-sensitive)
Console Disconnect Timer Interval 10 minutes
Negotiation Auto (see Note)
STP State Forwarding
Security Mode Automatic
Management Interface Setting Default
RS-232 Port Setting Default
Data Bits 8
Stop Bits 1
Parity None
Flow Control None
Baud Rate 9600 bps
SNTP Setting Default
System Time 00:00:00 on January 1,
1970
SNTP Status Disabled
SNTP Server 0.0.0.0
UTC Offset +0
Daylight Savings Time (DST) Enabled
Poll Interval 600 seconds