Vanguard CT-7000 S3 - Manual (Page 117)

REV 1 CT-7000 S3 USER’S MANUAL
112
d. The screen will be updated with the new transducer position information:
If the transducer was moved 5 inches, the screen should display 5.00 IN. You can
continue to move the transducer slider and observe the screen values to make sure they
are correct. Press the
[STOP] key to end the test and return to the “START-UP” menu.
TRANSDUCER TEST:
T1= 5.00 in / 360.0°
T2= 0.00 in / 000.0°
T3= 0.00 in / 000.0°
R1= 0.00 IN
R2= 0.00 IN
R3= 0.00 IN