Vanguard CT-7000 S3 User Manual
Page 58
Advertising
CT-7000 S3 USER’S MANUAL
REV 1
53
g. The following screen will be displayed:
Hold down the
[ARM]
switch and press the
[START]
key.
h. The following screen will be displayed:
Continue to hold down the
[ARM]
switch until testing is finished. You will be returned
to the “START-UP” menu once testing is finished.
NOTES
• Please see section 3.3.5 for information about printing test results.
• The CT-7000 S3 can be configured to print tabulated and graphics reports
automatically after performing a test. Please see section 3.2.3 for further
information.
TEST IN PROGRESS
HOLD "ARM" UNTIL
TEST COMPLETES.
(UP TO 25 SECONDS)
HOLD "ARM" UNTIL
TEsT COMPLETES.
"START" TO BEGIN
"STOP" TO ABORT
Advertising