Vanguard CT-7000 S3 - Manual (Page 88)

CT-7000 S3 USER’S MANUAL REV 1
83
3.4.5. Restoring a Test Record from a USB Flash Drive
You can restore a test record from a USB Flash drive to the CT-7000 S3's working memory using
the steps below:
a. Make sure the USB Flash drive containing the test record(s) is inserted in the CT-7000
S3's USB Flash drive port ("USB MEM" port). Then start from the "START-UP" menu:
Press the [3] key (SAVE/RESTORE).
b. The following screen will be displayed:
Press the [2] key (RESTORE SHOT).
NOTE
Option 5 (COPY TO THUMB DRIVE) will be displayed only if a USB Flash drive is
connected to the unit.
c. The following screen will be displayed:
Press the [2] key (THUMB DRIVE).
d. The following screen will be displayed:
RESTORE THUMB DRIVE
REC_
1. INTERNAL STORAGE
2. THUMB DRIVE
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE
1. TIME BREAKER 09/17/13
2. GET RESULTS 10:10:10
3. SAVE/RESTORE
4. SETUP
5. DIAGNOSTICS