Vanguard CT-7000 S3 User Manual
Page 96
CT-7000 S3 USER’S MANUAL
REV 1
91
Type the record number to be deleted and press the
[ENTER]
key. If you do not
know the record number, you can first print a test record directory using the
instructions in section 3.4.3. The selected test record will be deleted and the
following screen will be displayed:
Press any key to continue. The screen shown at the beginning of step d will be
displayed again allowing you to delete additional records if desired. Press the
[STOP]
key to return to the "START-UP" menu.
2. ERASE ALL RECORDS
Press the
[2]
key (ERASE ALL RECORDS) if you would like to erase all the test
records stored in the USB Flash drive. The following screen will be displayed:
If you would like to abort the erase operation, press the
[STOP]
key. No records
will be erased from the USB Flash drive, and you will be returned to the "START-
UP" menu.
Press the
[ENTER]
key to continue with the erase operation. The following
screen will be displayed when all records have been deleted from the USB Flash
drive:
ERASE ALL THUMB DRIVE
RECORDS?
ARE YOU SURE?
"ENTER" TO CONTINUE.
THUMB DRIVE REC_000
ERASED!
ERASE THUMB DRIVE
REC_