Vanguard CT-7000 S3 User Manual
Page 46
CT-7000 S3 USER’S MANUAL
REV 1
41
1. ENGLISH (In./deg)
Press the
[1]
key to enter the rotary encoder linear distance per degree using
English units (inches per degree). The following screen will be displayed:
Type the desired value using the keypad. You can press the
[CLEAR]
key to reset
the value to 0.000 In/Deg. Press the
[ENTER]
key to save the new value. You will
be returned to the “START-UP” menu.
2. METRIC (MM/deg)
Press the
[2]
key to enter the rotary encoder linear distance per degree using Metric
units (millimeters per degree). The following screen will be displayed:
Type the desired value using the keypad. You can press the
[CLEAR]
key to reset
the value to 0.000 MM/Deg. Press the
[ENTER]
key to save the new value. You will
be returned to the “START-UP” menu.
MM/degree
36.64 MM/deg
inches/degree
1.442 in/deg