Vanguard CT-7000 S3 - Manual (Page 51)

REV 1 CT-7000 S3 USER’S MANUAL
46
d. The following screen will be displayed:
Press the
[2]
key (LOAD SETUP).
e. The following screen will be displayed:
Type the setup number to load using the numeric keypad.
NOTE
If there is no setup stored in the selected memory location, the following
screen will be displayed:
Press any key to return to the “START-UP” menu.
f. The following screen will be displayed:
Press the
[ENTER]
key to load the selected setup.
g. The following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
SETUP LOADED!
SETUP NUMBER: 1
NOTE
ENGLISH
"ENTER" TO CONTINUE
SETUP NOT FOUND!
ENTER SETUP NUMBER
TO LOAD (1-9)
RESISTIVE ENCODER:
1. CREATE NEW SETUP
2. LOAD SETUP
3. PRINT SETUP DIR