Vanguard CT-7000 S3 - Manual (Page 49)

REV 1 CT-7000 S3 USER’S MANUAL
44
h. The following screen will be displayed (the units of measure displayed will depend on
your choice in step e):
Enter the distance the transducer was moved using the keypad, and then press the
[ENTER] key.
i. The following screen will be displayed:
If you prefer, you can enter a note to be associated with the setup using the keypad.
Press the
[ENTER] key when done typing.
j. The following screen will be displayed:
Enter a setup number from 1 to 9 using the keypad.
k. The following screen will be displayed:
Press the [ENTER] key to save the setup.
NOTE
If a setup already exists at the selected memory location, it will be over-ridden
by the new setup values.
"ENTER" TO SAVE
SETUP NUMBER 1
ENTER SETUP NUMBER
TO SAVE (1-9)
ENTER SETUP NOTE:
↑/↓
TO POSITION
"ENTER" TO ACCEPT
ENTER THE DISTANCE
MOVED:
IN
"ENTER TO CONTINUE"