Summary of warnings and cautions – Drucker Diagnostics QBC STAR Dry Hematology Analyzer User Manual

Page 13

Advertising
background image

6000-300-000 1–7

1 – Introduction

summary of Warnings and Cautions

Carefully observe all warnings and precautions in this manual and on labeling of QBC STar tubes
concerning the safe handling of blood and blood-derived products.

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.

Do not, under any circumstances, remove the ground prong from the instrument power plug.

Blood and body fluids may contain the Hepatitis B virus (HBV), Hepatitis C virus (HCV), human immu-
nodeficiency virus (HIV), or other disease-causing agents. Handle all patient specimens as potential
biohazards capable of transmitting infection. Wear appropriate personal protective equipment, including
laboratory gloves, when collecting, handling, and processing blood and body fluids.

In addition to wearing gloves, the use of disposable lab coats or gowns and protective glasses or
goggles is recommended when working around the instrument.

ACRIDINE ORANGE REAGENT MAY BE TOXIC; DO NOT INGEST. AVOID CONTACT WITH SKIN, EYES,
AND CLOTHING.

If a tube breaks in the unit, carefully remove the tube with a hemostat or other device, using puncture
resistant utility gloves. CONTACT QBC TECHNICAL SUPPORT FOR ADDITIONAL INFORMATION.

Do not handle the QBC STar tube by the glass collection end of the tube.

Do not use any QBC STar tube if any part of the carrier or tube is chipped or cracked.

The user should not perform any servicing except as specifically stated in this manual. refer other
problems to trained personnel, or return the instrument to QBC Diagnostics for repair.

Turn instrument power off and unplug the power cord before servicing.

Do not immerse the QBC STar instrument in water or other liquid.

Do not attempt to move the instrument rotor by hand. Moving the rotor manually can cause damage
to the instrument.

Ensure the device is turned off prior to connecting the external power supply to a device or aC outlet.

Do not attempt to insert your hand or any other object in the cavity located on the base of the instru-
ment while in operation.

Do not lift or turn the instrument on its back or side while it is plugged in as damage may occur.

6000-300-000 1-7

Advertising