Drucker Diagnostics QBC STAR Dry Hematology Analyzer - Manual (Page 22)

QBC Star System Operator’s Manual
6000-300-000 2–8
Printer Settings
Internal Printer
Internal Printer lets you enable or disable the QBC STar system’s built-in printer. When you
select the “Printer Settings” option, a sub-menu titled “Printer Settings” appears.
When the printer is ENABLED, the menu lets you disable the printer by selecting option 2. You
can disable the printer by confirming that the arrow cursor (
) is pointing to option 2 and
pressing the key. The status of the internal printer will now be displayed as “Disabled”.
When the built-in printer is DISABLED, you can enable it by selecting option 1. You can enable
the printer by confirming that the arrow cursor (
) is pointing to option 1 and pressing the
key. The status of the internal printer will now be displayed as “Enabled”.
External Printer
an external printer can be enabled or disabled if it is attached to a USB port on the back of the
instrument. When you select the “Printer Settings” option, a sub-menu titled “Printer Settings”
appears.
Enable/Disable External Printer
When the printer is ENABLED, the menu lets you disable the printer by selecting option
4. External printing is disabled by default. When the printer is enabled, the status of the
external printer will be displayed as “Enabled”. You can disable the printer by confirming
that the arrow cursor (
) is pointing to option 4 and pressing the key. The status
of the external printer will be displayed as “Disabled”.
Support
Create Support File
1. Insert a USB drive into any available USB port.
2. Lift access panel to access menu keypad where paper comes out.
3. Press ( ESC ) key menu will display.
4. Press the down arrow key to option #4 “Support” until side ( ) indicator arrow
is beside.
5. Press the Enter key to select Support option.
6. Press the Enter key again to select option 1 “Create support file”.
7. Menu screen should read “Writing support file to USB” (Wait 60 seconds).
8. Completion of file export is indicated by “Please remove USB drive”.
9. remove USB drive.
10. Press the Enter key
11 To exit system menu press the ESC key twice.
6000-300-000 2-8