InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 25)

www.infocus.com
Installation
25
Adjust the projected image
Adjust the position of the projected image:
1. Place the projector so that it is perpendicular to the screen, Image (1).
2. Raise the front of the projector and press the foot lock on the projector.
Loosen the foot lock can lock the adjustable foot. Rotate the adjustable foot to
adjust the height.
Rotating the adjustable foot in the direction shown in the Image (2) to extend it, and
rotating in the opposite direction retracts it, thus adjusting the vertical projection
angle.
Image (2)
Max Angle
(10°)
Max length
41mm
Image ( 1)
Adjustable feet lock