InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 86)

www.infocus.com
Useful function
86
USB display function
Select this function to can project the image and audio from the computer through the
USB converter cable.
When using Windows:
Windows operating environment
Operating System Windows Vista, 7, 8, 10. 32bit and 64bit
CPU Intel Core 2 Duo 2.0 GHZ or faster compatible processors
Memory Capacity 256MB or above (512MB or above)
Disk Space Available 20MB or above
Monitor Resolution 640x480 and above
CAN NOT guarantee that the PC meeting the above conditions can operate
normally.
Project USB display
1. Using USB-B cable to connect the projector to the USB display terminals.
• Items in grey are not available.
2. Press the information source menu on the remote control or the input button on the
control panel, then select [ USB display ] in the input source menu.
3. Press the driver icon in the computer's task bar , the select one item in the
pop-up menu bar.
• Pop-up menu only anglais
[ Active audio ] / [ Disable audio ] Sets up the output from the computer's audio
[ Play video ] / [ Pause video ] Switch on playing and pausing images
[ Start / Stop ] Sets up the output from the computer's image
[ Exit ] Exit USB Display
Note • Resolution of the computer screen will be switched.
• If the driver is not installed on the computer, the driver will be removed
when the USB cable is disconnected.
• You need wait for a moment, if you want project computer screen.
• Connect the USB cable directly to the computer's USB connector.
When connecting the USB hub, it may be abnormal.
The termination of USB display
1. Remove the USB cable directly,when terminate USB monitor.
• You never need follow "Remove Hardware Safel", when USB cable is not connected.