InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 41)

www.infocus.com
Basic operation
41
Blank (BLANK)
Press the BLANK button on remote control;
a blank screen displays to replace existing
image. Press the BLANK button or any other
button to restore the image.
Press the BLANK to toggle switch your screen
as shown below:
BLANK
 Normal  BLANK 
 Normal  ......
Timer (TIMER)
Press the TIMER button on remote control. A
timer animation (00:00) displays on the upper
right conner and starts timing in format of
(00:00-59:59).
Press the TIMER button to stop timing. Press
the TIMER button again to disable the timing
function.
Digital Zoom + (D.ZOOM+)
Press the D.ZOOM+ button on remote control
to enter the Digital Zoom mode.
When OSD menu disappear, the screen
display digital zoom + information.
*Only for input as VGA, RGBHV, and the
screen size setting as Normal or Wide.
Digital Zoom - (D.ZOOM-)
Press the D.ZOOM- button on remote control
to enter the Digital Zoom mode.
When OSD menu disappear, the screen
display digital zoom - information.
Press any other key to exit the digital zoom +/-
mode.
Screen size selection (SCREEN)
Press the SCREEN button on remote control
to select required screen size mode.
Press the SCREEN button on the remote
control to select the size of the screen to
return to the normal screen size.
The BLANK screen disappears
if no buttons are pressed
in 2 seconds.
BLANK
Timer
Screen
Zoom +/- Blank
Remote control
02
：
02
Timer display