InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 77)

www.infocus.com
Network control
77
1 Versions
Displays the firmware
version of the projector.
2 LAN status
Displays the LAN
connection status.
1 Enter old password
Enter the password for the
configuration.
2 Enter new password
Enter a new password.
3 Confirm new password
Re-enter the new password to
confirm.
4 Apply
Update settings.
5 Power
Switch on the power of
the projector on / off.
6 Source select
Switch the input
source of the projector.
1 Brightness
Adjust the brightness
of the projected image.
2 Contrast
Adjust the contrast of
the projected image.
3 Sharpness
Adjust the sharpness of
the projected image.
4 Color
Adjusts colour saturation
of the projected image.
5 Tint
Adjusts the tint of the
projected image.
6 Colour temperature
Adjust the colour temperature
of the projected image.
System Status
General Setup
Picture Setup
Image Setup
Network Setup
Versions
Firmware Version 0.00.1003
LAN Status
IP Address 192.168.0.65
Subnet 255.255.255.0
Gateway 192.168.0.1
Wire MAC Address 00:1e:c0:f2:11:e6
Network Display System>System Status
[ System status ]
page
1
2
System Status
General Setup
Picture Setup
Image Setup
Network Setup
Brightness (0---63) 32
Contrast (0---63) 32
Sharpness (0---15) 8
Color (0---63) 0
Tint (0---63) 0
Color Temperature
Red (0---63) 32
Green (0---63) 32
Blue (0---63) 32
Network Display System>Picture Setup
[ Picture setup ] page
1
3
5
2
4
6
Enter Old Password
System Status
General Setup
Picture Setup
Image Setup
Network Setup
Network Display System>General Setup
Change Password For Webpage
Enter New Password
Confirm New Password
Apply
Power & Source
Power On Off
Source Select HDMI 1
[ General Setup ]
page
1
3
5
2
4
6