InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 53)

www.infocus.com
Setting
53
Setting
The projector has Setting function, you can
select other functions as described below.
Menu operation
Press < MENU > button on the remote control
or on the top control panel to display the OSD
menu. Press  button to select the setting
menu, then press <OK> or  button.
1. Press  button to select required item.
2. Press <OK> button.
3. Press
 button to set options.
Direct power on
Set the power mode ON, when the power cord
is connected to a power outlet.
1. Press  button to select [ Direct power
on ] menu.
2. Press <OK> button.
3. Press
 button to select required item.
Get into standby mode.
Start up immediately.
Standby mode
Set power consumption in standby mode, no
matter whenever your projector is operated
through network.
1. Press  button to select [ Standby
mode ] menu.
2. Press <OK> button.
3. Press
 button to adjust levels.
Some function will be disabled
once your projector is in ECO
standby mode to reduce power
consumption. Network and RS-
232C serial communication
will be unavailable except the
POWER on command during that
mode.
Off
On
ECO
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Setting menu
Direct power on
Light source mode
Setting
Standby mode
High land
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Standby mode
Setting
Standby mode
High land
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Direct power on
Light source mode
Direct power on