InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 60)

www.infocus.com
Expand
60
Keystone
Select this function to store and reset keystone
after closing the projector or unplugging the AC
power.
• This function is only when the option about
auto keystone is not set On.
Store keystone after closing the
projector or unplugging the AC
power.
Keystone function will be cancelled
after closing the projector or
unplugging the AC power when the
standby mode is set to ECO. mode.
When the standby mode is set to
normal, keystone will be cancelled
if you unplug the AC power; while
it will be stored when closing the
projector.
Store
Reset
H/V Keystone
Select this function to correct the projected images horizontally or vertically.
Press

button
to reduce upper
width
Press

button
to reduce bottom
width
Press

button to
reduce left width
Press

button to
reduce right width
4-Corner correction
Se lect this function to correct the projected images of four corners distorted.
Press  button to keystone at four corners of the screen. The four corners are
looped in sequence shown below:
Top left Top right Bottom right Bottom left
Expand
Keystone
Store Keystone
H/V Keystone
Curved correction
Reset value
Corner correction
Keystone sub-menu