InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 44)

www.infocus.com
Display
44
Display
Auto PC adj.
Select Auto PC Adj. function to adjust Fine
sync, H position, V position, H size to be
compatible with the computer automatically.
Menu operation
Auto PC adj.
Press < MENU > button on the remote control
or on the top control panel to display the OSD
menu. Press  button to select the display
menu, then press <OK> or  button.
1. Press  button to select [ Auto PC adj. ]
menu.
2. Press <OK> button.
Fine sync
(Only for PC signal input)
Adjust image to the best state when the image
jitters, or the image outline dims.
1. Press  button to select [ Fine sync ]
menu.
2. Press <OK> button.
3. Press
 button to adjust Fine sync.
Adjustment range is from 0 to +31. Please
adjust to the least interference state.
H Position
(Only for PC signal input)
On the premise that the relative position of
both projector and the screen is set up right,
you can move the image horizontal position,
if the position of the projected image on the
screen is deviated.
1. Press  button to select [ H position ]
menu.
2. Press <OK> button.
3. Press
 button to adjust image H
position.
Adjustment range is from -5 to +5.
Display
Auto PC adj.
Fine sync
H position
V position
H.Size
Aspect Wide
Front
Upper left
Blue
Project way
Menu position
Background display
System
Note
• The projector will perform
Auto PC Adjustment function
automatically, when its signal is
input for the first time.
• Auto PC Adjustment function
may fail to work if computer
models is not compatible with
the input signal.
• Auto PC Adjustment function
may fail to work if you select
the following system signal
format: 480i, 576i, 480p, 576p,
720p, 1080i, 1080p, or signals
from the HDMI terminal.
Auto PC adj. menu
Display
Auto PC adj.
Fine sync
H position
V position
H.Size
Aspect
Wide
Front
Upper left
Blue
Project way
Menu position
Background display
System
H position menu