InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 45)

www.infocus.com
Display
45
V position
(Only for PC signal input)
On the premise that the relative position of
both projector and the screen is set up right,
you can move the image vertical position, if
the position of the projected image on the
screen is deviated.
1. Press  button to select [ V position ]
menu.
2. Press <OK> button.
3. Press
 button to adjust image
V position.
Adjustment range is from -5 to +5.
H.Size
(Only for PC signal input)
You can adjust and reduce the interference
caused by patterns of the projected vertical
stripes. The following projected patterns may
cause a circular pattern (Noise). Adjust the
amount of interference to the minimum. Users
can point the clock to adjust images.
1. Press  button to select [ H.Size ] menu.
2. Press <OK> button.
3. Press
 button to adjust H.Size level.
Adjustment range is from -15 to +15 .
Aspect
Adjust the image to fit the screen size, while
keeping aspect of input signal's unchanged.
Press < MENU > button on the remote control
or on the top control panel to display the OSD
menu. Press  button to select the display
menu, then press <OK> or  button.
1. Press  button to select [ Aspect ] menu.
2. Press <OK> button.
3. Press
 button to select the required item.
Use the maximum size to project
while keeping the aspect of input
signal's unchanged.
Normal
Display
Auto PC adj.
Fine sync
H position
V position
H.Size
Aspect Wide
Front
Upper left
Blue
Project way
Menu position
Background display
System
Aspect menu
Display
Auto PC adj.
Fine sync
H position
V position
H.Size
Aspect
Wide
Front
Upper left
Blue
Project way
Menu position
Background display
System
V position menu
Display
Auto PC adj.
Fine sync
H position
V position
H.Size
Aspect
Wide
Front
Upper left
Blue
Project way
Menu position
Background display
System
H.Size menu