InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 49)

www.infocus.com
Display
49
Select the computer system manually
1. Press the MENU button on remote control
and the OSD displays. Press  button to
point to the Input icon, press  button or
<OK> button and the Input menu displays.
2. Press  button to select System Signal
Format, then press <OK> button.
3. Press  button to select required system
signal format, then press <OK> button to
confirm your selection.
Video
Select this function to set resolution of input
signal to be compatible with the PC.
Set Video / S-video input signal colour system
or Component input signal scanning mode.
1. Press  button to select [ System ] menu.
2. Press <OK> button.
3. Press
 button to select wanted system.
Display
System
1024x768,75HZ
1280x768,75HZ
System for PC signal
Display
System
AUTO
PAL
SECAM
NTSC
NTSC4.43
PAL.M
PAL.N
PAL60
System for Video signal
RGB input signal
Display the compatible name
input signal name.
When projector has no
compatible signal with one
from connected PC, the PC
can adjust automatically
to run and Auto appear on
the system. If the image is
not projected out correctly,
please adjust it to match
your computer manually.
No signal input come from
PC. Please check the
connections.
Video input signal
When projector select the
input signal colour system
automatically. Set [ PAL-M ]
or [ PAL-N ] manually.
When projector can not
display images correctly
in [ Auto ], please set
input signal colour system
manually.
1024x768
60HZ, itp
Auto
-----
Auto
[PAL]
[SECAM]
[NTSC]
[NTSC4.43]
[PAL-M]
[PAL-N]
[PAL60]