ClearOne XAP 800 - Manual (Page 82)

Operation ~ Monitoring Views 76
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Meter Views
The Meter Views window allows you to monitor the level of any input, output, or
processing signal of the XAP 800. You can monitor the same parameter on multiple
inputs (or outputs or processing channels) for comparison or you can monitor an
entire signal flow from input to output. Click the Meters button on the G-Ware
toolbar to open this window.
To configure Meter Views
1. Select the unit number, meter type, and channel you want to use. Note
that you can configure the meters such that you can monitor the same input
signal as it makes its way through various stages in the XAP 800.
2. Enable the meter by clicking the adjacent Enabled box.
3. When you have finished making changes, click Close to exit the window.
Figure 5.22.
Meters button
Figure 5.23. Meter Views window
Figure 5.21. Gate View window