NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 299)

Table 78. Port description information
Description Field
The MAC address of the interface or VLAN. MAC Address
The bit offset value that corresponds to the interface or VLAN when the
MIB object type PortList is used to manage in SNMP. PortList Bit Offset
The interface index associated with the interface or VLAN. ifIndex
Display transceiver module information
To enable high-speed fiber and Gigabit Ethernet, short- and long-distance connections
on the switch, SFP and SFP+ fiber ports can accommodate standard 1G SFP and 10G
SFP+ transceiver modules. You can view the transceiver module information for all fiber
ports on the switch.
To view transceiver module information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Ports > Port Transceiver.
The Port Transceiver page displays.
6. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Main User Manual 299 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual