NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 591)

5. Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous
Trunk Interface Configuration.
The Private VLAN Promiscuous Trunk Interface Configuration page displays.
6. From the Interface menu, select an interface or LAG for which you configured the
VLAN port mode as Promiscuous Trunk mode.
For more information about port VLAN modes, see Configure the private VLAN port
mode on page 581.
7. Select the check box for the VLAN configuration.
8. Click the Delete button.
Your settings are saved.
The primary and secondary VLANs are removed from the selected interface. The
VLANs themselves are not deleted.
9. To save the settings to the running configuration, click the Save icon.
Private VLAN isolated trunk interface: Add primary and
secondary VLANs to the trunk
If you configure the private VLAN port mode of an interface as Isolated Trunk (see
Configure the private VLAN port mode on page 581), you can add multiple VLAN
configurations to the trunk. Each VLAN configuration consists of single primary VLAN
and one or more secondary VLANs.
To add a primary VLAN and secondary VLANs to a private VLAN isolated trunk
interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Traffic Control > Private VLAN > Private VLAN Isolated Trunk
Interface Configuration.
Main User Manual 591 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual