NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 320)

9. From the MMRP Mode menu, select Enable or Disable to specify the administrative
mode of MMRP on the interface.
Enabling this mode allows for the propagation of MAC address information on the
interface. In turn, this allows for the registration and deregistration of both individual
MAC address information and group MAC address membership. The default is
Disable.
10. From the MSRP Mode menu, select Enable or Disable to specify the administrative
mode of MSRP on the interface.
Enabling this mode allows the interface to reserve resources in the network to
facilitate time-sensitive traffic to flow end to end. The default is Disable.
11. In the Join Timer field, specify the time that the interface must wait for JoinIn
messages from other MRV participants after the interface sends a Join message.
If the time that you specify passes before the interface receives a JoinIn message,
the interface resends the Join message. The range is from 10 to 100 centiseconds.
The default is 20.
12. In the Leave Timer field, specify the time that the interface must wait before it
deregisters attributes from other MRV participants.
If the interface receives Join messages from other participants before the time that
you specify expires, the attributes are not deregistered. The range is from 20 to 600
centiseconds. The default is 300.
13. In the Leave All Timer field, specify the time that the interface must wait after it starts
the MRP registration process, before the participants refresh and reregister their
attributes.
The range is 200 to 6000 centiseconds. The default value is 2000.
14. In the MSRP SR class PVID field, specify the default VLAN ID that the interface must
use for MSRP stream traffic.
15. Click the Apply button.
Your settings are saved.
16. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable information displayed on the page.
Main User Manual 320 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual