Yaskawa Σ-V Series AC Servo Drives Rotational Motor MECHATROLINK-III - Manual (Page 202)

6.2 Alarm History Display (Fn000)
6-3
6
Utili
ty Fu
ncti
ons (Fn
)
6.2
Alarm History Display (Fn000)
This function displays the last ten alarms that have occurred in the SERVOPACK.
(1) Preparation
There are no tasks that must be performed before displaying the alarm history.
(2) Operating Procedure
Use the following procedure.
1. In the SigmaWin+ main window, click Alarm - Display Alarm .
The Alarm Display dialog box will appear.
2. Click the Alarm traceback tab to view the alarm history.
A list of past alarms can be viewed.
Note:
• If the same alarm occurs after more than one hour, the alarm will be saved. If it occurs in less than one hour, it
will not be saved.
• Delete the alarm history by clicking Clear . The alarm history is not cleared on alarm reset or when the SERVO-
PACK main circuit power is turned OFF.
MECHA
MECHA
Alarm number and Alarm name
Alarm history number
(The greater the number, the older the
alarm is.)