Elektron Monomachine - Manual (Page 108)

GLOBAL SETTINGS
100
1. Select FILE in the GLOBAL menu. Then select DIGIPRO MGR using the [ARROW]
keys and press [ENTER/YES].
Use the [UP] and [DOWN] keys to choose the different options in the MODE column. Use
the [RIGHT] and [LEFT] keys to move between the MODE and POS NAME columns.
• A “u” in front of a waveform indicates that it is a waveform uploaded by a user.
The factory waveforms don’t have any letter in front of them.
• Move the focus over a waveform to see a graphic representation of it.
• If you have a +Drive equipped Monomachine the currently active Digibank will be
displayed under the DigiPro logotype.
RECEIVE WAVEFORMS
Waveforms can be received either in a specific waveform slot, to consecutive slots or by
using the ORG option. The ORG option is handy when you want to transfer several wave-
forms to specified waveform slots.
To receive waveforms using the ORG method, follow the instructions below.
1. First of all, make sure that the MIDI cables are properly connected. The MIDI OUT of the
sending device should be connected to the MIDI IN port of the Monomachine. To send
waveforms from a computer you can use our free C6 program, found on the Elektron
homepage. If loading a wav or aiff file, don’t forget to convert it to a DigiPRO syx file in
C6 before sending it.
2. When in the DIGIPRO MGR, choose RECEIVE and then press the [RIGHT] arrow key to
move the focus to the POS NAME column. Choose ORG.
3. Press [ENTER/YES] to make the Monomachine ready to receive waveforms. The dis-
play will show “WAITING...”
4. Send the waveforms to the Monomachine. A counter on the display will show how many
and to which position the waveforms have been received. If the waveforms have previ-
ously been dumped from the Monomachine, they will be stored in their former locations.