Elektron Monomachine - Manual (Page 119)

EARLY STARTUP MENU
111
replaced with factory patterns, kits, songs and global settings. No other Snapshots or
Digibanks on the +Drive will be affected.
SOFT RESET
To perform this operation, press the fourth [TRIG] key. This is a milder form of reset which
will retain all data inside your Monomachine.
MIDI UPGRADE
By choosing this option, the Monomachine prepares itself to receive an OS upgrade via
MIDI.
1. Check that all MIDI cables are connected correctly.
2. Load the new OS in an appropriate computer program capable of sending sysex files.
We recommend the program C6 which can be found on the Elektron website. You can
also use another Monomachine with an up to date OS. Connect it to the Monomachine
that will be upgraded, and transmit the OS. Read more about this procedure in the
“SEND UPGRADE“ section.
3. Choose MIDI UPGRADE by pressing the fifth [TRIG] key. The Monomachine will wait for
an OS to be transmitted to it and a message stating “READY TO RECEIVE MIDI
UPGRADE
” will appear on the screen.
4. Once the Monomachine senses that an OS is being sent to it the <TRIG> LED’s will light
up one after another. Please note that this procedure takes a while.
5. When the transfer is finished the message “PREPARING FLASH” appears.
6. “PREPARING FLASH” is shortly followed by “UPDATING FLASH”. When this process is
finished the OS is updated.
SEND UPGRADE
With this option you can send the OS installed in your Monomachine to a another unit.