Elektron Monomachine - Manual (Page 50)

ADDITIONAL KIT SETTINGS
42
ALL TRK (all track) makes the multi trig channel control all six tracks at once.
Note events received on the multi trig channel will be distributed to all six tracks for parallel
mono operation. The joystick controllers, velocity and key tracking will control all tracks
simultaneously, as assigned in the Assign window (see page 38). The Multi Env is applied
to the All Track MULTI TRIG mode (see page 43). There is no context tab for the All Track
selection.
SPLIT KEY (split mode) allows you to split the keyboard in two zones, each controlling part
of the tracks.
There is an additional tab for the split mode, called ZONES. From the ZONES tab you con-
trol which tracks will be devoted to the upper and the lower part of the keyboard, and where
the split point is located on the keyboard.
The TRACK parameter controls which will be the first track to be controlled by the upper
part of the keyboard. All tracks above this one will be controlled by the upper part and the
rest by the lower.
The KEY parameter controls which key is the first to control the upper part of the tracks. All
keys from this one will be directed to control the upper section of the tracks.
For example the settings KEY: C-4 and TRACK: 3 plays tracks 3 to 6 from C-4 and up and
tracks 1 to 2 below C-4.
SEQ START (sequencer start) makes the sequence restart for each note played. The
sequence will be transposed based on which note is played. The original pitch will be
invoked on C-4. The multi envelope is trigged when notes are played (see page 43).