Elektron Monomachine - Manual (Page 48)

ADDITIONAL KIT SETTINGS
40
KEY TRACKING
The Key Tracking is connected to the note index from the last key pressed. For example, if
C-1 was pressed, the key tracking value will be low, and if C-8 was pressed it would reach
almost its maximum value.
There are two additional parameters on the Key Tracking controlling if the high pass and/or
low pass filter should automatically track the pitch. See page 30 for more information on the
filter.
HPF (High pass filter tracking) disconnects the standard filter tracking of the high pass filter
if set to OFF.
LPF (Low pass filter tracking) disconnects the standard filter tracking of the low pass filter if
set to OFF.
TRIG TRACK SETTINGS
The trig track settings is a group of parameters which affect the way certain aspects of the
sound in the track are trigged.
1. You find the TRIG window in the KIT menu. Press the [KIT] key and navigate to the
TRIG icon using the [ARROW] keys.
2. Press [ENTER/YES] to enter the TRIG TRACK menu. In the TRIG TRACK window you
will find five parameters. Navigate between the parameters using the [UP] and [DOWN]
keys. Use the [LEFT] and [RIGHT] keys to adjust the parameter values.
TRIG POS (trig position) allows you to forward the notes being played on the current track
to another. For example, if you edit TRIG POS for track 1, and set it to point to track 3, then
track 3 will also play notes that are sent to track 1. You can chain TRIG POS, so that sev-
eral tracks can be trigged from one.