Elektron Monomachine - Manual (Page 29)

MONOMACHINE SYNTHESIS ARRANGEMENT
21
You can load the “UNDO KIT” to restore your most recent unintentionally lost kit. This can
be useful when accidentally changing pattern and the kit is changed so that your unsaved
changes are lost. When you have restored your kit using the undo kit, don’t forget to save
it.
COPY KIT
When in the KIT SAVE or KIT LOAD menus you can copy and paste kits. For loading a kit,
see section “LOADING A KIT”, on page 19. For saving a kit, see section “SAVING AND
NAMING A KIT”, on page 19.
1. When you are in either the KIT SAVE or KIT LOAD menus, select the kit you want to
copy, hold down the [FUNCTION] key and press the [RECORD] button. A message say-
ing “COPY KIT” appears.
2. Use the [UP] and [DOWN] keys to scroll to the slot you want to copy the kit to.
3. To paste the kit into the slot, hold [FUNCTION] and press the [STOP] button. The mes-
sage “PASTE KIT” appears.
• If you want to undo the action, press the [FUNCTION] + [STOP] buttons again. The
message saying “UNDO KIT” indicates that the paste operation has been undone.
CLEAR KIT
You can also clear kits while in the KIT SAVE or KIT LOAD menus.
1. Select the kit you want to clear, hold down the [FUNCTION] key and press the [PLAY]
button. A message saying “CLEAR KIT” appears.