Elektron Monomachine - Manual (Page 96)

GLOBAL SETTINGS
88
1. Connect the MIDI OUT of your Monomachine to the MIDI IN of the other unit and the
MIDI IN of your Monomachine to the MIDI OUT of the other unit.
2. Press [FUNCTION] + [KIT/SONG] to open up the GLOBAL menu. Use the [ARROW]
keys to select TURBO. Press [ENTER/YES].
3. CURRENT SPEED shows the current multiplier of the MIDI transfer rate. When not con-
nected to a device using Turbo protocol compatible software, the speed will therefore be
x1.0. Select which NEGOTIATE speed you want use. The Monomachine defaults to x10,
but this value can be lowered should it be needed. Press the [ENTER/YES] button to
start to negotiate. The CURRENT SPEED value will display the change of the MIDI
transfer rate.
• If you link two Monomachines together where one of them is a MKI model, you
might not be able to get a CURRENT SPEED value exceeding 6.7x.
AUDIO
Here you set the master tune as well as the routing.
MASTER TUNE
The global master tune can be set in this menu.
1. Select the AUDIO in the GLOBAL menu. Then select MASTER TUNE using the
[ARROW] keys and press [ENTER/YES].
Use [UP]/[DOWN] keys to set the integer part, and [RIGHT]/[LEFT] keys to set the frac-
tion. The default value is 440.0 HZ.