Elektron Monomachine - Manual (Page 17)

USER INTERFACE AND CONNECTORS
9
4. Switch all units on.
5. If you do not have any previous experience of the Monomachine we suggest that you fol-
low the “QUICK START” on page 11.
CARE INSTRUCTIONS
To ensure many years of trouble free operation, please follow the advice below:
• Never use any aggressive cleaners on the casing or the LCD overlay. Remove
dust, dirt and fingerprints with a soft dry cloth. More persistent dirt can be
removed with a slightly damp cloth using only water.
• Never use sharp objects near the display to avoid scratches or damage. Also
avoid applying any pressure to the display itself.
• When transporting the Monomachine, try to use the box in which it was originally
shipped with the padding supplied, or equivalent packaging.
• Make sure that you place the unit on a stable surface before use. If you mount the
unit in a rack, be sure to tighten all four screws in the rack mount holes.
• The memory used for storing patches and kits is powered by a battery inside the
unit. It will hold data for at least 6 years before needing replacement. If the battery
needs replacement, the “BATTERY LOW” message will appear in the display. Con-
tact Elektron support or your nearest repair center.
• Turn off the machine when not in use.