Elektron Monomachine - Manual (Page 90)

MONOMACHINE ROUTING
82
USING THE AUDIO INPUTS
Audio can be routed from the external inputs and be effected with both track effects and FX
machines. The audio inputs are available to the FX machines found in the Monosynth
named “FX”. Follow the steps below to assign
1. Press the [KIT/SONG SETUP] key to open the KIT window. Move the focus to the EDIT
icon and press [ENTER/YES] key.
2. Scroll down to the FX machines. You will find this selection at the end of the list.
3. The THRU machine is a good starting point as it will just let the audio from the source
selected through without other processing but a signal amplifier and of course the track
effects. Assign the THRU machine to a track.
4. Use the [LEFT] and [RIGHT] keys go to the INPUT parameter field and select INP A,
INP B or INP AB. Please note that the INPUT parameter field does not appear until an
FX machine is selected with [ENTER/YES].
• INP A - Monophonic audio is used from Audio Input A.
• INP B - Monophonic audio is used from Audio Input B.
• INP AB - Stereo audio is used from Audio Input A and B.
• Before any sound is heard from the audio input you need to trig the track so the
machine is activated. Play any note for the track; the pitch of the key is ignored by
the THRU machine.
In the routing example below synthesis machines are mixed with FX machines with input
taken from the audio inputs. The audio inputs are only printed explicitly in this example.
4:/5)&4*4
4:/5)&4*4
4:/5)&4*4
'9
*/1
"#
'9
*/1
"
'9
*/1
#
5'9
5'9
5'9
5'9
5'9
5'9
*/165

"#
.*9 .*9 .*9