Swing, Swing -64 – Elektron Monomachine User Manual
Page 72
ADDITIONAL SEQUENCER FEATURES
64
2.
Select the track you want to edit the transpose settings for using the [TRACK] keys.
TRACK (track transpose) sets the individual track transpose in semitones for the selected
track. The parameter is controlled with DATA ENTRY knob A.
PAT (pattern transpose) controls the transpose setting for the full pattern. This parameter is
the same for all tracks. Use the DATA ENTRY knob B on the first row to alter the transpose
amount.
SCALE (scale) is set per track. To alter this parameter, move the inverted focus square
with the [LEFT] and [RIGHT] keys, and adjust the settings with [UP] and [DOWN].
•
--- - The notes are transposed the exact amount of notes specified by the sum of the
track, pattern, song and multi trig transpose. This is the normal mode. No KEY value can
be set.
•
FIX - Only the track transpose is used for transposing. No KEY value can be set.
•
MAJ - The transposed notes are kept within the Major scale specified by the KEY value.
•
MIN - The transposed notes are kept within the Minor scale specified by the KEY value.
KEY (key) is only available for certain SCALE selections and defines in which key the MAJ
and MIN scale selections will be.
•
Set SCALE to “FIX” for tracks playing percussive sounds. If the track is trans-
posed in a song or using multi trig transpose the percussion will then keep its
sound while melodic tracks are transposed.
SWING
Swing can be used for adding shuffle, or other sub-step rhythmic adjustments to a pattern.
The swing settings are saved as part of the pattern.
1.
The SWING window is opened by pressing [SWING] while holding [FUNCTION].
2.
Select which track you want to edit the swing settings for using the [TRACK] keys.
Use the LEVEL knob to control the swing amount. The swing amount is set between 50%
and 80%. 50% is the default value which makes the pattern unaffected by swing, and the