Rear connectors, Rear connectors -7 – Elektron Monomachine User Manual
Page 15
USER INTERFACE AND CONNECTORS
7
REAR CONNECTORS
1.
Power On/Off switch.
2.
Power in.
•
Caution! Use only an Elektron-approved power supply with your Monomachine
MKII version. It allows the unit to be used all over the globe without the need of
voltage converters. If you need a new power supply the specifications are 6VDC,
3A, 5.5x2.5mm (2.5mm inner diameter) DC power plug (power at center),
ungrounded 2 prong inlet (IEC320-C8). Using the wrong type of adapter may result
in damage to your unit. Damage caused by the use of incorrect power supply is
not covered by warranty. If you are unsure about your power supply, please con-
tact Elektron support.
•
Note that the MKI models require a different power supply compared to the MKII
models. Please see “DIFFERENCES BETWEEN THE MKI AND MKII MODELS” on
page 114 for detailed info about the specifications of the power supply that should
be used with the MKI models of the Monomachine.
3.
MIDI Thru/Out/In
4.
Audio Input B/A
5.
Individual Audio Outputs F/E/D/C
&
H;M"+%
'
,
)
+
*
(
H;M"+%B@>>
&
,
)
+
*
(
'