Additional kit settings, Assign, Additional kit settings -38 – Elektron Monomachine User Manual
Page 46: Assign -38
ADDITIONAL KIT SETTINGS
38
ADDITIONAL KIT SETTINGS
This chapter deals with all kit settings not covered in the previous chapters.
ASSIGN
This menu allows the joystick, note velocity and note position tracking to be assigned to up
to two parameters of choice. This can allow for a lot of dynamic depth of the sound with lit-
tle effort.
1.
Press the [KIT] key and navigate to the ASSIGN icon using the [ARROW] keys.
2.
Press [ENTER/YES] to enter the ASSIGN menu. In the ASSIGN window you will find a
minimum of four and a maximum of six tabs. Navigate between the tabs using the
[LEFT] and [RIGHT] keys. Use the DATA ENTRY knobs to change settings of the
parameters found in the tabs. The settings made here are applied per track. Select
which track you want to edit the assign for with the [TRACK] keys.
All tabs have two rows with three parameters in each in common.
PAGE (page) selects between the seven DATA pages, plus the special pitch destination,
just as on the LFO’s.
DEST (destination) parameter allows to select one of the eight parameters in the DATA
page chosen by the PAGE parameter.
ADD (add/depth) controls how much of the chosen parameter that will affect the destina-
tion. ADD can be set to positive and negative amounts.
•
Setting ADD to +63 or -64 allows for modulating a parameter to any extreme value.
For example, if the target parameter is set to 64 an ADD setting of +32 is sufficient
for modulating the target value to its maximum (127). If the target value is set to
zero, an ADD setting of +64 is needed for the target to be able to reach its maxi-
mum value.