Lenze 8400 HighLine - Manual (Page 1381)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
1381
17 Function library
17.1 Function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
17.1.93 L_GainOffsetPhiP_2
This FB can amplify an angle signal and add an offset to it afterwards.
• The internal calculations (addition and subtraction) are carried out with 32 bits without
overflow/underflow. Division is not remainder considered.
• Gain and offset are selected via parameters.
• The value provided at the dnOut_p output is internally limited to ±2 31 -1.
Inputs
Outputs
Parameter
Function
Identifier
Data type
Information/possible settings
dnIn_p
DINT
Input signal
Identifier
Data type
Value/meaning
dnOut_p
DINT
Output signal
• Internal limitation to ±2 31 -1 (±2147483647)
Parameter Possible settings Info
C00678/3 -2147483647 Incr. 2147483647 Offset
• Lenze setting: 0 incr.
C00678/4 -2147483647 2147483647 Gain factor
• Lenze setting: 65536
/B*DLQ2IIVHW3KL3B
GQ,QBS GQ2XWBS
2IIVHW *DLQ
& &
 r 
dnOut_p dnIn_p Gain factor ⋅ ( ) Offset
+ =